User guide

14
Main Part Description
Figure 1-1 Parts Overview
z Dome Cover To protect the dome cover from scratches and dust, do not remove the
protective vinyl from the dome cover until the installation is complete.
z Dome Cover Lock-up
Screw
Used to lock up the dome cover after attaching the dome cover to the
main body.
z Dome Cover Assembly
Stud
Used to line up the stud on the main body and the stud on the dome cover
when attaching the dome cover to the main body.
z DIP Switch Used to set up camera IDs and protocols.
z Surface Mount Bracket
and Mounting Screw Hole
Used for surface mount type, wall mount type and ceiling mount type.
They are not used for in-ceiling mount type.
z Main Connector Used for the power wire, the video cable and the RS-485 communication
cable connection.
Surface Mount Bracke
t
Mounting Screw Hole
Dome Cover
Assembly Stud
DIP Switch
Main Connector
Dome Cover Lock-up Screw
Dome Cover
Introduction