INSTRUCTION MANUAL DWC-PTZ10x Mini SPEED DOME CAMERA
This lightning flash with arrowhead symbol is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to individuals. This exclamation point symbol is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. DWC-PTZ10x [Mini SPEED DOME CAMERA] www.Digital-Watchdog.
NOTICE Important Safeguard 1. Read Instructions Read all of the safety and operating instructions before using the product. 2. Retain Instructions Save these instructions for future reference. 3. Attachments/ Accessories Do not use attachments or accessories unless recommended by the manufacturer as they may cause hazards, damage product and void warranty. 4. Water and Moisture Do not use this product near water or moisture. (Indoor Version) 5.
CONTENTS 1 ○ Introduction Features 5 Product & Accessories 7 Parts & Functions 8 2 ○ Installation DIP Switch Setup 9 Direct Installation on the Ceiling 11 Installation using Flush Mount Ring Bracket 12 Installation using Ceiling Mount Bracket 13 Installation using Wall Mount Bracket 14 Cabling 15 3 ○ Operation Checking Before Operation 17 Preset and Pattern Function Pre-Check 17 Start OSD Menu 18 Reserved Preset 18 Preset 19 19 20 Group 21 Schedule 22 Other Functions 23
INTRODUCTION 1 Features Camera Specifications Sensor: ¼“ Super-HAD II CCD 520TVL [Color] 570TVL Lens: 10x Digital, 10x Optical Zoom (3.
8 Groups are memorized to repeat a series of Presets, Patterns, and Scans. Each group can be stored 20 entities of Preset/Pattern/Group functions. This function enables the dome camera to move in combinations of those functions repetitively. 4 Privacy Zone Masks can be programmed. The Masked Zones can be set anywhere in the viewing area and can be any size. 7 Schedules can be assigned by day and time. Appropriate actions (such as Home, Preset, Group, Pattern, Scan) can be defined for each rule.
INTRODUCTION 1 OSD (On Screen Display) Menu OSD menu is provided to display the status of camera and to configure the functions interactively. There are currently 7 Languages that are supported in the OSD Menu: [ENGLISH/ESPAÑOL/FRANÇAIS/DEUTSCH/ITALIANO/РУССКИЙ/PORTUGUÊS] The information such as Camera ID, Pan/Tilt/Zoom/Direction, and Alarm Input & Output, date/time, current temperature and Preset can be displayed on screen. Each display item can be turned On or Off independently.
INTRODUCTION 1 Product & Accessories Main Product & Accessories Main Body Surface Mount Bracket Accessory Manual Terminal Block Torque Screw Driver DWC-PTZ10x [Mini SPEED DOME CAMERA] www.Digital-Watchdog.
INTRODUCTION 1 Main Product Main Body Sun Shield Housing Accessory Terminal Block Torque Screw Driver Manual Options Pendant Mount Bracket DWC-PTZ10x [Mini SPEED DOME CAMERA] www.Digital-Watchdog.
1 INTRODUCTION Parts Name & Functions Surface Mount Bracket Mounting Hole Main Body Lockup Screw Dome Cover Main Unit / Surface Mount Bracket Surface Mount Bracket Prototol&Braud-rate Dip switches Cabling Terminal Black Back of Main Unit This is used to install the camera directly on the ceiling. After separating the cover attach this directly to ceiling. Camera must be assembled at the last stage.
2 INSTALLATION DIP Switch Setup Before you install the camera, you should set the DIP switches to configure the camera ID, Baud rate, and communication protocol. Protocol 0x00 : Auto Select 0x01 : Pelco-D 0x02 : Pelco-P 0x03 : SAMSUNG 0x04 : VCLTP 0x05 : KD6 Buad Rate 0x00 0x01 0x02 0x03 0x04 : : : : : 2400 4800 9600 19200 38400 RS-485 Terminate ID Setting (1~255) Camera ID Setup ON ON ID number of camera is set using binary number. The example is shown below.
2 INSTALLATION Communication Protocol Setup ON Select the appropriate Protocol with DIP switch combination. Switch State ON 1 2 3 4 5 6 7 Protocol SW-1 SW-2 SW-3 Sw-4 OFF OFF OFF OFF Auto Protocol ON OFF OFF OFF PELCO-D OFF ON OFF OFF PELCO-P ON ON OFF OFF SAMSUNG 8 If you set the protocol as Auto Protocol, camera will automatically recognize the type of Protocol. Auto Protocol supports Pelco-D and Samsung Protocol.
2 INSTALLATION Installation using Surface mount on the Ceiling In ceiling mount 1. Pass the cables from the camera unit through the ceiling mount bracket. Then, connect video, communication, and power cables. 2. Install surface mount bracket to the ceiling using the four screws. 3. Align the four screw holes in the camera unit with the screw holes in the ceiling mount bracket. Then, secure the camera in place by tightening the four screws. 4. Carry out the settings and adjustments for the camera. 5.
INSTALLATION Surface mount 1. Pass the cables from the camera unit through surface mount bracket. Then connect Video, communication, and power cables. 2. Install surface mount bracket to the ceiling usingthe four screws. 3. Align the four screw holes in the camera unit with the screw holes in the Surface mount bracket. Then, secure the camera in place by tightening the four screws. 4. Carry out the settings and adjustments for the camera. 5. Secure the dome cover by tightening with screws.
INSTALLATION Installation using Pendant Mount Bracket 1. Pass the cables from the camera unit through the pendant mount bracket. Then connect Video, communication, and power cables. 2. Install pendant mount bracket to the ceiling using the four screws. 3. Align the four screw holes in the camera unit with the screw holes in the Pendant mount bracket. Then secure the camera in place by tightening the four screws. 4. Carry out the settings and adjustments for the camera. 5.
2 INSTALLATION Installation using Wall Mount Bracket 1. Pass the cables from the camera unit through the wall mount bracket. Then connect Video, communication, and power cables. 2. Install wall mount bracket on the wall using the four screws. 3. Attach the main unit to the wall mount bracket with the four screws. 4. Carry out the settings and adjustments for the camera. 5. Secure the dome cover by tightening with the screws. DWC-PTZ10x [Mini SPEED DOME CAMERA] www.Digital-Watchdog.
INSTALLATION 2 Cabling ) W O L L E Y ( O E D I V ) K C N) DA I EL R RB E (( W CD O CN P VG Dual Voltage DC12V/AC24V Monitor E L B A C M R A L A BNC Video ) )E KT CI AH 5L 8BW 4(( S+RDD G N I R E D L O S RS-485 DD+ Controller/DVR 1 (Black): SENSOR 1 (Black): IN-COMCOM 2 (Yellow): IN1 2 (Brown): SENSOR1 3 (Brown): IN2 3 (Red): SENSOR2 4 (Orange): Relay COM 4 (Red): Relay Out Sensors Relay Out 5 (Orange): (Yellow): Relay NO Relay Out Dual Voltage DC12V/AC24V Controller/DVR BNC Video PWR(+)
INSTALLATION 2 Power Connection Please, check the voltage and current capacity of rated power carefully. Rated power is indicated in the back of main unit. Power Consumption Power Mode Input Voltage Range While in Normal While Heater operation in operation DC 12V DC 11V ~ 24V 14 W(MAX) 26W(MAX) AC 24V AC 20V ~ 28V 9W(MAX) 23W(MAX) RS-485 Communication For PTZ control, connect this line to keyboard and DVR.
INSTALLATION 2 Video Connection Connect with BNC coaxial cable. Alarm Input Connection Sensor Input SENSOR1 INTERNAL SENSOR2 SENSOR COM It is noted that short circuit between GND and Input pin means alarm activation. If you want to use Alarm Input, the types of sensor must be selected in OSD menu. The sensor types are Normally Open and Normally Closed. If sensor type is not set properly, the alarm can be activated reversely. Normally Open (N.
3 OPERATION Check Points Before Operation Before power is connected, please check the cables carefully. The camera ID of the controller must be identical to that of the camera to be controlled. The camera ID can be checked in the System Information screen of the OSD Menu. If your controller supports multi-protocols, the protocol must be changed to match the camera. If you changed camera protocol by changing DIP switch, the change will be effective after you reboot the camera.
3 OPERATION Starting OSD Menu Function Using the OSD menu, Preset, Pattern, Scan, Group and Alarm Input function as well as various detail camera settings can be configured in an interactive manner. Enter Menu [95] Reserved Preset Description Some Preset numbers are reserved for direct access to specific functions in OSD menu.
OPERATION 3 [196] : Heater OFF (Turn off and switch to Manual mode) [197] : Fan ON (Turn off after 5mins and switch to Auto mode) [198] : Fan OFF (Turn off and switch to Manual mode) [200] : Digital Zoom ON [201] : Digital Zoom OFF DWC-PTZ10x [Mini SPEED DOME CAMERA] www.Digital-Watchdog.
OPERATION 3 Preset Function Max. 127 positions can be stored as Preset positions. The Preset number can be assigned from 1 to 128. It is noted that preset “95” is reserved for starting OSD menu. Camera characteristics (i.e. White Balance, Auto Exposure) can be set up independently for each preset and they are adjusted by using OSD menu. Four relay outputs can be controlled in conjunction with one Preset.
3 OPERATION Pattern Function Pattern Function enables the camera to memorize the path (mostly curve path) created by keyboard controller. By running the pattern, the memorized path can be reconstructed exactly as memorized whenever required. 4 Patterns are available and Maximum 1000 communication commands can be stored in a pattern. Set Pattern Pattern can be created by one of the following two methods. Method 1) [Pattern NO.] Pattern editing screen is displayed as below.
OPERATION 3 Group Function The Group function allows camera to run in a sequence of Presets, Patterns and/or Scans. Max 8 Group can be stored. Each Group can have max 20 action entities which can be preset, pattern or Scan. Dwell time means the time interval between actions and is adjustable in the menu. Additionally, there is an option number with which Preset speed as well as the repetition number of Pattern and Scan can be set.
OPERATION 3 Schedule Function The Schedule function allows running an appropriate function like Preset, Scan, Group, Pattern, Home move at a designated day and time. For example, if you setup a rule Tuesday at 9:00AM and Preset 1 (say Main Gate), the camera will move to Main Gate every Tuesday at 9:00AM. If you choose Weekday, camera will move to Main Gate every day except the weekend. It is noted that due to the real time clock, the time data will be kept regardless of blackout.
OPERATION 3 Other Functions Preset Lock This function is made to protect preset data from unauthorized overwriting. If Preset Lock is ON, Preset save command using Hot Key is disabled while saving a Preset via the OSD Menu is acceptable.
OPERATION 3 OSD Display of Main Screen P/T/Z Current Pan/Tilt angle in degree, zoom magnification and a compass direction. Camera ID Current Camera ID(Address). Action Title The followings are possible Action Titles and their meanings.
4 HOW TO USE OSD MENU General Rules of Key Operation for Menu The menu item enclosed with < > always means it has a sub menu. For all menu levels, to go into sub menu, press NEAR key. To go up one menu level, press FAR key. To move from item to item in the menu, use joystick in the Up/Down or Left/Right directions. To change a value of an item, use Up/Down of the joystick on the controller. Press NEAR key to save values and Press FAR key to cancel values.
HOW TO USE OSD MENU 4 System Information SYSTEM INFORMATION -------------------------FIRMWARE VER 1.02S0 COLOR SYSTEM NTSC PROTOCOL SAMSUNG BAUD RATE 9600 ADDRESS 255 BACK EXIT Firmware Ver. Shows current firmware version of camera. Color System Shows current analog video system of the camera. Protocol Shows current Protocol for PTZ control Baud Rate Shows current Baud Rate of PTZ control. Address Shows current Camera ID for PTZ control.
4 HOW TO USE OSD MENU Privacy Zone Mask Setup Select area in image to mask. Mask No [1~4] Select Mask number. If the selected mask already has data, camera moves as it was set. Otherwise, “UNDEFINED” will be displayed under “Mask NO”. Display [ON/OFF] Defines whether or not camera mask shows on images. Clear Mask [CANCEL/OK] Deletes data in the selected mask NO. Privacy Zone Area Setup Move the camera to area to be masked. Then the menu to adjust mask size will be displayed.
HOW TO USE OSD MENU 4 Motion Setup Setup the general functions of Pan/Tilt motions. MOTION SETUP -------------------------PRESET LOCK ON POWER UP ACTION ON AUTO FLIP AUTO JOG MAX SPEED 140/SEC JOG DIRECTION NORMAL FRZ IN PRESET OFF BACK EXIT Preset Lock [ON/OFF] This function is made to protect preset data from unauthorized overwriting. If Preset Lock is ON, it is impossible to create and delete Preset, Auto Pan, Pattern and Scan.
HOW TO USE OSD MENU 4 Parking Action Setup If Park Enable is set to ON, camera runs assigned function automatically if there is no PTZ command during assigned "Wait Time". Park Enable [ON/OFF] Wait Time [5 seconds ~ 4 hour] The time is displayed with "hh:mm:ss" format and you can change this by 1 min units. Park Action [HOME/PRESET/PATTERN/AUTOPAN/SCAN] Ex) If HOME is selected for Park Action, camera will move to home position when there is no PTZ command during assigned "Wait Time.
4 HOW TO USE OSD MENU Function Setup Configure 5 Special Functions with this menu FUNCTION SETUP ------------------------- Preset Setup 127 Presets from the number 1 to 128 can be assigned excluding preset 95 which are reserved for Menu. Auto Pan Setup Up to 8 Auto Pans are available, which makes camera move slowly between two BACK EXIT preset points. Pattern Setup Up to 4 patterns can be stored in the dome.
4 HOW TO USE OSD MENU Preset Setup PRESET SETUP -------------------------PRESET NO. 1 Preset Number [1~128] If a selected preset is already defined, camera moves to pre-defined position and
HOW TO USE OSD MENU 4 Edit Preset Scene 1 Using Joystick, move camera to desired position. ○ 2 Press NEAR key to save current PTZ data. ○ 3 Press FAR key to cancel. ○ Edit Preset Label ① Edits label to show on monitor when camera arrives at presets. In Edit Label menu, a reverse rectangular is cursor. As soon as EDIT LABEL - PRESET 1 -------------------------[█ ] ---------1234567890 OK ABCDEFGHIJ CANCEL KLMNOPQRST UVWXYZabcd efghijklmn opqrstuvwx yz<>-/:.
HOW TO USE OSD MENU 4 Scan Setup AUTO PAN SETUP -------------------------APAN NO. 1 1ST POS. NOT USED 2ND POS. NOT USED APAN Number Selects Auto Pan number to edit. If a selected Auto Pan has not defined, "NOT USED" is displayed in 1st Position and 2nd Position APAN SPEED 30/SEC CLEAR APAN CANCEL 1st Position BACK EXIT [1~8] 2nd Position [PRESET 1~128] Set up the 2 position for Auto Pan function. If a selected preset is not defined, "UNDEFINED" will be displayed as shown below.
HOW TO USE OSD MENU 4 Pattern Setup Pattern Number [1~4 ] Selects Pattern number to edit. If a selected pattern number is not defined, "UNDEFINED" will be displayed under selected pattern number. Clear Pattern [CANCEL/OK] Deletes data in current pattern Edit Pattern Starts editing pattern. Edit Pattern ① Using Joystick, move to start position with appropriate zoom. To start pattern recording, press NEAR key. To exit this menu, press FAR key.
4 HOW TO USE OSD MENU Group Setup SCAN SETUP -------------------------SCAN NO. 1 UNDEFINED CLEAR SCAN CANCEL Scan Number [1~8] Selects Scan number to edit. If a selected Scan number is not defined, "UNDEFINED" will be displayed under selected Scan number. BACK EXIT Clear Scan [CANCEL/OK] Deletes data in current Scan Edit Scan Starts editing Scan. Edit Group EDIT SCAN 1 -------------------------NO. ACTION NO.
HOW TO USE OSD MENU EDIT SCAN 1 -------------------------NO. ACTION NO. DWELL OPT -------------------------1 PRESET 1 00:03 360 2 NONE 3 NONE 4 NONE 5 NONE -------------------------SAVE [:MOVE CURSOR] CANCEL [:CHANGE VAL.] EDIT SCAN 1 -------------------------NO. ACTION ### DWELL OPT -------------------------1 PRESET 1 00:03 360 2 NONE 3 NONE 4 NONE 5 NONE -------------------------SAVE [NEAR:EDIT ACT] CANCEL [FAR: EDIT END] EDIT SCAN 1 -------------------------NO.
4 HOW TO USE OSD MENU Schedule Setup Master Enable SCHEDULE SETUP -------------------------MASTER ENABLE ON DAY TIME ACT NO ON 1 UNDEFINED 2 UNDEFINED 3 UNDEFINED 4 UNDEFINED 5 UNDEFINED 6 UNDEFINED 7 UNDEFINED BACK [ON/OFF] Decide whether Schedule function is active or not. Clear Schedule [CANCEL/OK] Delete all data in current Menu Edit Schedule Start editing Schedule.
HOW TO USE OSD MENU 4 Camera Setup Setup the general functions of zoom camera module. Focus Mode CAMERA SETUP -------------------------FOCUS MODE SEMIAUTO DIGITAL ZOOM ON IMAGE FLIP OFF [AUTO/MANUAL/SEMIAUTO] Sets camera focus mode. SEMIAUTO Mode This mode toggles focus mode automatically between Manual Focus mode and Auto Focus mode. Manual Focus mode activates in preset operation and Auto Focus mode activates when BACK EXIT jog operation starts.
HOW TO USE OSD MENU 4 Auto Exposure Setup AE SETUP - GLOBAL -------------------------BACK LIGHT OFF DAY/NIGHT AUTO1 BRIGHT 25 IRIS AUTO SHUTTER ESC AGC NORMAL SSNR MIDDLE SENS-UP BACK EXIT BACK LIGHT [ON/OFF] Sets Backlight Compensation DAY / NIGHT [AUTO1/AUTO2/DAY/NIGHT] AUTO1 exchanges Day/Night mode faster than AUTO2. i BRIGHT [0~100] Adjusts brightness of images. Iris, Shutter Speed and Gain are adjusted automatically in correspondence with this value.
4 HOW TO USE OSD MENU System Setup SYSTEM SETUP ------------------------- LANGUAGE ENGLISH BACK EXIT SYSTEM SETUP You can OUTPUT set up DATE/TIME, ALARM RELAY, PASSWORD, HOME POSITION, NORTH POSITION. DATE Date is displayed in dd/mmm/yyyy format. The day is automatically calculated when you set the day. TIME Time is displayed in HH:MM:SS format.
4 HOW TO USE OSD MENU FAN FAN/HEATER SETUP -------------------------FAN RUN TEMP 40°C HEATER RUN TEMP 15°C Above this temperature, the blower fan will start RUN TEMP automatically. Range: 30 ~ 80℃ ( 86 ~ 176℉) HEATER RUN TEMP Bellow this temperature, the Heater will be tuned on automatically. Range: -10 ~ 20℃ ( 14~ 68℉) BACK EXIT SET HOME HOME position means the origin of PAN angle POSITION calculation. The value of PAN angle displayed on the screen is based on this HOME position.
HOW TO USE OSD MENU 4 System Initialize Clear All Data Deletes all configuration data such as display, camera and motion setup and so on.
SPECIFICATIONS 5 Specifications Model Video Signal System CCD Max. Pixels Effective Pixels Camera Horizontal Res. S/N Ratio Zoom Focal length Min. illumination Day & Night Focus Iris Shutter Speed AGC White Balance BLC SSNR Range Pan/Tilt Speed Pan/Tilt Preset Pattern Scan Group Other Functions Communication Protocol Privacy Zone Alarm Input Alarm Output OSD General Rated Power** Dimension Weight Operating Temp.
SPECIFICATIONS 5 Dimension Surface Mount In ceiling Mount Wall Mount Unit (mm) DWC-PTZ10x [Mini SPEED DOME CAMERA] www.Digital-Watchdog.
Pendant Mount DWC-PTZ10x [Mini SPEED DOME CAMERA] www.Digital-Watchdog.