User's Manual Part 2

5-5

Resetting the VitalSense XHR

Unlike the Capsule Sensor and the Dermal Sensor, the VS- XHR Sensor

can be re-used.

The following procedure is very similar to the charging procedure except

the VS-XHR Sensor is left on the multi-charger for only a short time.

1 Connect the multi-charger to the power supply as described on

page5-2.

2 Clip the VS-XHR on the multi-charger as indicated by the diagram on

the top of the multi-charger.

3 Leave the VS-XHR Sensor on the unit for two (2) minutes to erase the

previous data and reset the unit for activation and re-use.

HAPTER