User's Manual Part 2

5-4 VS-XHR Sensor
Precautions Prior to Activating the VS-XHR Sensor
Read before activating sensor!
Become familiar with the section “ Notices to Practitioners and Subjects ”
on page-vii. It contains important information you need to know prior to
activating and using the VS-XHR Heart Rate Sensor.
Activation
Activation is nearly identical to the Capsule and Dermal sensors. The
primary difference is the VS-XHR Sensor can be re-activated and re-used.
1 The process of activation begins by turning on the VitalSense Monitor
(for an illustration, see “ Activating Sensors Using the VitalSense
Monitor ” on page2-7). Press the Power button for approximately ½-
second.
2 Press the Activate Sensor button on the monitor.
3 Follow the directions on the display. Place the VS-XHR Sensor lens
against the Activation Port. The lens is marked with a black circle as
shown below.
4 Press Activate Sensor again.
5 Follow the directions on the display just as with the VitalSense Capsule
and Dermal sensors.
Lens