User's Manual Part 2
5-3
3 The VS-XHR Sensor is attached to the metal post on the top of the
Multicharger. Attach the sensor body by pushing the clip inward
toward the center of the device.
4 Place over the metal post that is marked with the round sensor symbol,
and release the clip. The tail clip is attached in a likewise manner to the
post marked appropriately with the tail clip symbol. The LED will
illuminate red indicating that the sensor is charging.
Push inward to fasten or to release
The VS-XHR Sensor’s optimum charge-time is 11 hours. Fully
charged, the device will function continuously for four days.
5 When the sensor is fully charged, the LED will turn green. Remove the
sensor from the charger and activate.