User's Manual Part 2

4-5
4 Replace the battery as shown below, with the positive end inserted first.
Replacement battery inserted
5 Replace the battery compartment cover, and finger-tighten. Do not
over-tighten.
6 Press the Power button to turn the monitor power on.
NOTE: If sensors are active, VitalSense will reestablish communi-
cation with them and begin data acquisition. This may take a few
minutes.
Calibration
Sensors
Sensors are factory calibrated and do not require user to enter calibration
values.
Monitor
The VitalSense Monitor is calibrated at the factory. An annual factory
calibration and refurbishment schedule is recommended.