User's Manual Part 2

3-22 VitalSense Operation - Application Program
Update Firmware
Periodically new firmware may be released by Mini Mitter Company, Inc.
These releases may be made by CD, Website, e-mail, or other means.
Without regard to the distribution, the following process is to be used to
upgrade the firmware.
This procedure will erase all portions of the VitalSense monitor
memory. All setup and data information will be lost. If data are in
the memory, you must download prior to beginning the upgrade
procedure.
1 The VitalSense Monitor must be connected to the host PC, and
communication established (see “ Connecting VitalSense Hardware ”
on page3-4).
2 Begin from the VitalSense Options window. Click on Upgrade
Firmware. The following display will appear.
Main > Setup > Options > Firmware Upgrade
3 Use the browser to navigate to the source of the firmware. In this case,
the firmware upgrade is located on a CD. Select the appropriate file. It
will have an .hex extension as shown below. Click on Open, and the
selected file will appear in the upgrade field.
Firmware file selection