User's Manual Part 2

3-10 VitalSense Operation - Application Program
Read Monitor Clock
This function will enable you to read the on-board monitor clock, and will
display it in the Monitor Clock Settings fields.
There are two ways to change the time in the VitalSense Monitor from the
Application Program.
Manually Set Monitor Time
• Selectively set each field individually, then click on Apply Settings to
Monitor Clock button.
Set Monitor to PC Time
• Click on Set Monitor Clock to PC Clock. The PC time will be entered
into the VitalSense Monitor automatically.
Clear Memory
The VitalSense Monitor uses a portion of its memory for data, and another
portion for subject and sensor information. Clear Memory erases the data
portion of the memory, i.e., the temperature information sent by the
sensors. The data memory pertains only to data, not the sensor or subject
information. Making changes within the Subject Information function will
erase the subject and sensor portion of the memory.
• If you have downloaded the data from an on-going experiment, you
may Clear Memory and begin another data collection session with the
same subject/sensors information.
• If you are beginning a new experiment, you should Clear Memory.
NOTE: If you plan to change or delete subjects, this step may be
skipped. You will be given the opportunity to clear the data memory
later.
Main > Setup > Options > Clear Memory