User's Manual Part 1

2-26 Monitor Operation and Sensor Activation
Setup Monitor RS-232 Interface
It may become necessary to change the RS-232 configuration. The default
configuration is: 57.6 kilobaud, Flow Control: Off.
Main > Setup Monitor > RS-232 Interface
The combinations available are listed in the table below:
NOTE: It is recommended that if you are unfamiliar with these
terms, you leave the settings to the default values.
Baud Rate 2400, 4800, 9600, 19.2 k, 38.4 k, 57.6 k, 115.2 k
Flow
Control
ON, OFF
Reporting ON, OFF