User's Manual Part 1

2-21
2 If you have sensors on-line, you will receive an advisory that the time
and date cannot be changed.
Sensor on-line advisory
3 Use the up and down arrow buttons to select either OK or Cancel, and
press Enter.
4 The following menu is the Time/Date entry display. To make changes,
use the arrows to navigate to the desired location, and press Enter.
Again, use the arrow buttons to make your selection.
Time/Date menu
Setting the Time and Date
This procedure will set the monitor to Local or UTC time.
1 The factory default for the Time/Date menu selection is Local. Use the
arrow buttons to toggle between Local and UTC time.
Local time