User's Manual Part 1

2-20 Monitor Operation and Sensor Activation
Adjusting the Time/Date
When setting the clock, use the arrow buttons to navigate through the
menus and increment and decrement the highlighted choices. Press Enter
to make your selection.
There are two methods by which the clock should be set.
Method A
1 Check (or uncheck) Daylight Saving Time Auto-set.
2 Set the UTC Offset.
3 Set the local time.
If the previous three steps are followed, the UTC clock will be set
automatically.
Method B
1 Set the UTC time.
2 Set the UTC offset.
3 Check (or uncheck) Daylight Saving Time Auto-set.
If the previous three steps are followed, the Local Time will be set
automatically.
NOTE: Although the clock functions are accessible from the moni-
tor front panel, it is much easier and more efficient to change them
from the VitalSense Application Program on the host PC. See “ Set-
ting the Monitor Clock ” on page3-9.
1 From the Main menu, use the arrow buttons to select Adjust Time/Date
and press Enter.
Adjust Time/Date