User's Manual Part 1

2-11
Sensor Does Not Activate
Failure to activate immediately
If the sensor does not activate within a few seconds, it may be waiting for
a transmission from a previously activated sensor. Hold the sensor in
place. Once the transmission has been received, the monitor will activate
the new sensor.
NOTE: As more sensors are brought on-line, the monitor may need
to wait for longer periods.
Activation delay notice
Failure to activate
If a sensor fails to activate, you will be prompted. There may be several
reasons for non-activation.
Sensor activation failed
• Wait approximately 5 seconds and try again.
• Check Data Views to verify that there is no sensor activation.
• Check that the sensor lens is aligned properly with the activation port.
• Attempt to re-try at least 3 times. If still not activated, return the sensor
to Mini Mitter for analysis.