User's Manual Part 1

2-9

7 Use the arrow buttons to choose either OK or Cancel, and press Enter.

8 If you choose to label the sensor, use the arrow buttons to choose the

appropriate identifier for the sensor, and press Enter. In the illustrations

below, the Right Leg (r_leg) is the label assigned to sensor 1204.

Sensor

Labeling

Activate Sensor > (activated) > OK > Identifier

9 Sensor activation is complete. For additional sensors, repeat the

procedure. Up to 10 sensors may be placed on-line per monitor.

NOTE: “id” uses the numeric sensor identification number instead

of a text label.

Sensor activation can also be initiated from the Main menu as shown

below. It is, however, physically easier to hold the sensor and use the

Activate Sensor button.

Alternate activation sequence - Main display > Sensor Options > Activate Sensor