User's Manual

C-11
Scheduled Events
During a scheduled event, if the marker button is pressed the annunciator
will silence, and the score range minimum value chosen during setup
will replace the two dashes. Each subsequent press of the marker will
increment the display until it reaches the score range maximum value
chosen during setup. If the marker button is pressed one more time, the
display will begin again at the minimum value.
Manual Event
During a “manual” event, i.e., when no alarm is sounded but a marker is
entered, the display will show two dashes. If the annunciator is enabled,
Actiwatch-Score will beep once per second for 10 seconds, or until the
event is scored.
Note: Once the marker button is pressed, released, and pressed
again and held, the LED will increment once per second.
LED Display
The display is a 2-digit, 7-segment LED. In addition to displaying the
score (event weighting), there are other functions as well.
• When an event is to be scored, the annunciator will beep once per
second for 10 seconds. If the annunciator is disabled, only the LED
will activate.
• The display will show the annunciator status (on or off) after the
marker button is pressed and held for 3 seconds (refer to
Annunciator on preceding page).
Note: AW-Score will not acquire activity data during the brief time
the LEDs are lit, such as when setting score values.