User's Manual

C-10 Actiwatch Hardware
Only one score can be recorded per epoch.
The score value and score type can be seen by placing your mouse over the
triangle at the top of the score value in the Actogram.
Per epoch score data can be seen in the Data List along with activity data, and
can be exported along with activity data and per epoch sleep analysis results. In
addition, a Marker/Score List is provided that includes only the score data. The
Score and Score Type columns can be shown or hidden in the Data List or Export
filesbyadjustingsettingsintheTools > Options > Data List window.
To generate statistics based on score data, use the Tools > Options window,
Statistics tab to include Score Statistics. This will cause these statistics to be
included for Rest, Active, Daily, and Custom Intervals. You can create Custom
Intervalsforanalyzingperiodsofinterest,withoutusingoraffectingsleep
statistics. See Getting Started in section 2 for help in creating custom intervals.
The annunciator is a miniature horn that generates a “chirp” form of audible
announcement. The annunciator sound exits through the side of the case. The
annunicator is water-resistant as well as the case.
Turning off the annunciator
1. Hold the marker button down 3 seconds.
2. The LED will display OF to verify the annunciator is off.
Turning on the annunciator
1. Hold the marker button down for 3 seconds.
2. The LED will display On to verify the annunciator is on.
Annunciator
Note: After setup, the annunciator is reset to On.
The marker button is a switch that is used to respond to an audible event and
enter a score to “weight” the event. It can also be used to turn the annunciator on
and off.
Marker
Button