User Manual

3-2 Communications
Congure
Actiwatch
Congure Actiwatch
1. Communications > Configure Actiwatch
ThiswilllaunchtheConfigureActiwatchWizard.
2. Remove the wrist/foot bands from the Actiwatch (optional).
The bands may interfere with proper Actiwatch placement.
3. Place the Actiwatch on the reader.
The green dot on the metal side of the Actiwatch must align with the green dot
on the ActiReader. Verify that the metal side is facing up, the green dots are
adjacentandthegreenLED‘ALIGNED’lightison.
4. Click Next to continue.
ThewizardwillchecktheActiwatchserialnumberandbatterylife.IfaLow
Battery Warning appears, please choose one of the three options from the pop-
up window. If the warning does not appear, proceed to step 6.
• ChangeBattery—wizardwillguideyouthroughthebatteryreplacement
process (see Actiwach Battery Replacement later in this manual).
 •ChangedBattery,update—wizardwillupdatethedatabase with the new
battery information.
 •Ignore—wizardwillignoretheLowBatteryWarning.
5. Click Next to continue.
Configure Actiwatch Wizard Welcome window