User Manual

3-1
S ECTION
3
The Actiware software is used to configure the Actiwatch device and retrieve
data from the Actiwatch through the use of the ActiReader.
To set up the ActiReader, see Installation and Setup in Section 1 of this manual.
C OMMUNICATIONS
Overview
ThiswizardwillconfigureanActiwatchfordatacollection.Thiswizardassumes
that the ActiReader or Actiwatch Reader is connected to the computer and the
appropriate COM port is selected. Please refer to Section 1 of this manual for
setting up the ActiReader and selecting a COM port.
The Configure Actiwatch Wizard will guide you through several windows. As
withotherActiwarewizards,youcanmakechangesateachwindow.Youcan
also travel between windows using the Back and Next buttons, or Cancel to
closethewizard.
Use the Show/Hide Actiwatch Details button to view additional information
associated with the watch.
Congure Actiwatch
CAUTION! The Congure Actiwatch wizard will delete all setup
information and data stored in the Actiwatch. To stop this wizard, select
the Cancel button. To retrieve data, proceed to Retrieve Data from
Actiwatch later in this section.