User Manual
2-13
Fine Control Method
To set your intervals graphically to the nearest epoch, use the following
procedure:
1. Click the left mouse button on the Actogram to place the epoch label.
2. Usethekeyboardarrowkeys(←,→,↑,↓)tomovetheepochlabelto
the desired interval start time.
Close-up of Interval Markers on Actogram
3. To place the interval start marker, press one of the following keys based
on the interval type you want to create:
R Set REST interval start
C Set CUSTOM interval start
E Set EXCLUDED interval start
W Set Forced WAKE interval start
S Set Forced SLEEP interval start
4. Once again, click the left mouse button on the Actogram to place the
epoch label, and use the arrow keys to place the epoch label at the
desired interval end time.
5. To place the interval end marker, press one of the following hotkey
combinations based on the interval type you’re creating:
SHIFT + R Set REST interval end
SHIFT + C Set CUSTOM interval end
SHIFT + E Set EXCLUDED interval end
SHIFT + W Set Forced WAKE interval end
SHIFT + S Set Forced SLEEP interval end
If you set an interval flag in the wrong location and want to move it, repeat the
above process.