User's Manual

1-21
ActiReader Battery Replacement Procedures
CAUTION! The black ActiReader model uses a 9V Lithium battery. The
white Actiwatch Reader uses a standard 9V battery. These batteries are
not interchangeable, and may result in damage to your device. Use of the
improper battery will void the warranty.
CAUTION! It is important that you thoroughly read the following
information prior to changing the battery. Failure to follow procedures
may result in immediate or subsequent damage to the device.
Battery Replacement
1. Disconnect the AC electrical supply and set the Power toggle switch to OFF.
2. Turn the ActiReader over so the battery cover is facing up.
3. Slide the battery cover in the direction of the arrow.
4. Carefully remove the battery from the housing unit and gently disconnect
the battery terminals.
5. Replace the battery.
6. Slide the battery cover back into place on the ActiReader.
7. Set the Power toggle switch to the ON position.
8. Verify the red LED Power light is blinking.
WARNING! Do not dispose of lithium batteries in re or ame. An
explosion may result. Only dispose in accordance with manufacturer’s
recommendation or local codes.