Mini Kong Installation instructions Farmhouse Sinks General Recommendations: Read installation-and maintenance: instructions thoroughly before installation: Inspect our sink for any noticeable damage before installation. Check all local applicable plumbing and building codes. These instructions are based on application to composite material or solid surface counter top installation only; counter ton application to stove, marble.
Mini Kong Installation Options: Mind Kong Farmhouse series sinks offer installation options depending on our design. Under mount Installation Flush mount Installation Above counter Installation {Recommended) Figure 1 Figure 2 Figure 3 Caution: All installation types need to allow room for faucet installation. Ensure attenuate clearance behind the sink for any faucet and backslash, as well a8 range of motion for faucet spouts and handles Typical under mount installation with 1/4" several recommended.
1. 4. Prepare the sink base cabinet Farmhouse sinks McGuire custom order sink base cabinets with a4 front cutout to accommodate 2 10" deep sink. Build structural supports on the inside frame of the sink base cabinet. The structural supports must support the weight of the sink and any attachments such as garbage disposals. When the sink is placed onto the cabinet support, make sure the top of the sink is evenly flush against the bottom of the counter top.
Mini Kong Care and Maintenance ALWAYS & Clean everyday by thoroughly rinsing with 8 mild spat and wain Water and wipe diy. % Rub lightly with a soft cloth in the direction of grain lines on a regular basks for additional preventative cleaning ® Keep the sink free of any standing water as this can cause a buildup of mineral deposit, which can affect the appearance of countersink. & Always rinse the sink after using any leaning agent and wipe dry.
Mini Kong Mini Kong warrants the product to be free from defects in workmanship and materials under normal use and service for the pend commencing from the initial date of purchase by the owner or end-user connector, or builder, from Min] Kong or an authorized Mint Kong dealer, through the lifetime of the original owner or end-user one {1} year from the initial date of purchase, any product reported to the authorized dealer or 1o Mini Kong.
