Installation Guide

Step 4 : Attach the mounting hardware to the prongs protuding from the

ep 5 : Apply Silicone or Plumber's Butty

underside of the sink rim. Make sure the hooked side of the mounting

Clean and dry the surface around the opening of the sink; Turn the unit upside down to apply

sealant

(not included) underneath of the sink rim.

ep 6 : Secure Sink to Countertop

• Insert the sink into the opening, check the alignment of the sink to the cutout in the countertop,

and press firmly (Figure 4)

• Tighten the screws in the front of the sink, followed by the ones in the back and on

the

sides

of the sink (Figure 5)

• Remove excess silicone-based sealant

• Allow sealant to set for 30-60 minutes

clip is facing away from the sink.