Quick guide Mini Crosser M1 Cabin medemagroup P9-0151-B ver. 2.0.
Medema Production A/S Quick guide P9-0151-Q 2 of 20 Version 2.0.
Medema Production A/S Contents Quick guide to the Mini Crosser M1 Cabin .............................................. 4 Introduction................................................................................................ 4 Control panel ............................................................................................. 5 Seat rotation............................................................................................... 8 Steering column ..........................................
Medema Production A/S Quick guide to the Mini Crosser M1 Cabin Introduction Congratulations on your new Mini Crosser M1 Cabin electric mobility scooter. You have now taken possession of an electric mobility scooter developed for outdoor driving by active users. It is what is called a Class C vehicle in accordance with the European classification of electric scooters. For optimum enjoyment of this vehicle - and to avoid breakdowns and accidents - we recommend that you read the User Manual carefully.
Medema Production A/S Control panel Avoid subjecting the control panel to jarring and knocks. Take care when driving and avoid hitting obstacles. Battery indicator Hazard warning lights Light switch Speed selector Handbrake Indicator lights, R/L Accelerator (four-finger control) Indicator lights, R/L Horn Horn Lever for adjusting the angle of the handlebars Charging socket Key switch Quick guide P9-0151-Q 5 of 20 Version 2.0.
Medema Production A/S Air channel Windscreen wiper + washer Fresh-air/hot-air switch Heat regulation Accelerator (four-finger control) Quick guide P9-0151-Q 6 of 20 Version 2.0.
Medema Production A/S Designation Description Key switch To start the vehicle: Turn the key to driving position (1) When the Mini Crosser is turned on, the control system performs a safety check of the electrical system. The check lasts half a second. If the accelerator is operated during this time, the Mini Crosser will not be able to move until you have turned the key to 0 and back to 1. Speed selector The tortoise in minimum position indicates the lowest speed range.
Medema Production A/S Designation Description Windscreen wiper Starts the windscreen wiper. Notice the variable speed ajustment. windscreen washer Spraying washer fluid on the front window. Fresh-air/hot-air switch Switch to toggle between heated and unheated air. Heat regulation Adjustable heat in the cabin. Note: Heat can be turned on even if the key is not in the key switch. Heating ribs should NOT be covered. REMEMBER! turn off the heat when you leave the vehicle.
Medema Production A/S 1 2 Release lever for seat rotation. Release lever for seat forward/back. Steering column Can be adjusted forward/back with the release lever. Pull down on the lever and pull the handlebars closer for a good driving position. Use the lever again and push the steering column forward to make it easier to get out. The height of the steering column can be adjusted approx. 11 cm up/down. First remove the rubber plug covering the Allen screw. Adjust the height using a 4 mm Allen key.
Medema Production A/S Charging The Mini Crosser should be charged while not in use. The charger supplied from the factory switches to trickle charging (very low power consumption) automatically when the batteries are fully charged. You can therefore leave the charger connected until the Mini Crosser is next used. The charger cannot overcharge the batteries. The charger will flash until charging is complete. Then it will show a steady light.
Medema Production A/S Battery indicator If there is an electronic fault, a number of lamps in the battery indicator will light up. The following table shows what they mean. For further information on troubleshooting see the User Manual. Lamps Causes Remedy 1 lamp The batteries need charging or the connection to a battery is poor. Check all connections between the controller and batteries. If these are fine, try charging the batteries 2 lamps Poor connection to the motor.
Medema Production A/S Serial number All vehicles have a serial number plate showing the year of production, month and serial number. The same serial number can also be found on the front of the User Manual. Please quote the serial number when making inquiries about servicing, spare parts, etc. Fuel for heater The tank for fuel is placed behind the seat, and filled from the outside. Use ONLY paraffin or diesel.
Medema Production A/S Heater Knob to: - turn heater on/off - ajusting the temperature - remove fault code. Indicator light for on/off and fault code readout. For more information: see Webasto user guide. IMPORTANT! The heating ribs by the window and by the legs should NOT be covered up when the heating is on. That will cause overheating of the heater. Quick guide P9-0151-Q 13 of 20 Version 2.0.
Medema Production A/S Windscreen wiper / washer Start the windscreen wiper by turning this knob. Notice the smooth speed ajusting. Windscreen wiper - turn the knob. Washer - press this button The Container for washer fluid is placed under the front cover. The container for the washer fluid. Quick guide P9-0151-Q 14 of 20 Version 2.0.
Medema Production A/S Driving the Mini Crosser M1 Cabin Getting in and out It is important to learn a safe technique for getting in and out of the Mini Crosser. In general the following method should be followed: • • • • Make sure that the Mini Crosser M1 Cabin is off (switch turned to 0) when getting in and out, otherwise the Mini Crosser could start if the accelerator was touched inadvertently. Make sure that the brake is on. (Lever for disengaging motor in top position.
Medema Production A/S General safety advice: • Make sure that the backrest is upright and the seat is as low as possible. • Positioning belts are recommended if the user is unable to maintain a good driving posture independently. • Adjust your driving to road conditions. Take account of light, traffic and weather. Be particularly careful when driving in the dark or in bad weather, such as rain or snow.
Medema Production A/S When driving in traffic... Be particularly aware of the following when driving in traffic: • The Mini Crosser is a low vehicle and not always easy for other road users to see. Make quite sure that other road users have seen you before driving onto the highway. • Be aware of the blind spots and look around them before changing direction. • Keep an eye on traffic behind you. Keep well over to the side of the road when driving on busy roads. • Turning right and left at crossroads.
Medema Production A/S Braking systems There are three braking systems on the Mini Crosser: • Motor brake - adjusts vehicle speed also when going downhill. • Magnetic brake - the magnetic brake is automatic and engages when the Mini Crosser stops. In an emergency, the Mini Crosser can be stopped instantaneously by turning the key switch. Please note that this will cause very sharp braking. The rear wheels will lock. Must NOT be used in the normal course of driving.
Medema Production A/S Own notes Quick guide P9-0151-Q 19 of 20 Version 2.0.
medemagroup
