Setup guide

22
FAQs
Q: Do I need to set my TV to a specific channel to use the Cox mini box?
A: If you used a coax cable to connect your TV to your mini box, you will need to set your TV to a
specific channel to receive a signal from the mini box; your TV will need to be set to channel 3 or
4 depending on the area you live in. As a rule, set your TV to channel 3 first and be sure to set the
switch on the back of your mini box to channel 3 to match the channel set on your TV. If you do not
see video or the program guide, turn your TV to channel 4 instead and change the switch on the
back of your mini box to channel 4.
Note: You must use your existing TV remote to turn your TV to channel 3 or 4. Using the mini box
remote will only turn the channel on your mini box.
Q: How do I receive an HD picture with my mini box?
A: If you have an HDTV set and are connected to the mini box via an HDMI cable, you will automatically
be tuned to the HD signal of a chosen network if one is available. On your televisions connected to a
mini box, there is no need to tune to HD channels in the 1000s or 2000s.
CCI140122_User_Guide 22 8/6/14 3:29 PM