Installation guide

Since both screens are containing the header and the title bar first those will be explained.
Title bar: shows the connection status, the firmware version and the mode of the
OpenUPS.
Screen header contains more elements:
- Status icons: The first icon is the mini-box.com icon which does not change during
the process. The second icon shows the power state of the OpenUPS, in our case the
"USB powered". This icon can have two other statuses ("Line powered" and "Battery
powered") and the current icon shows the power state of the OpenUPS (powered from
USB, Vin or Vbattery)
- Capacity: remaining capacity of the battery
- RTE: "Run time to empty" of the battery
- Voltage IN: Voltage at Vin header of the OpenUPS (J1 header)
- Voltage Bat: main battery voltage (J4 header)
- Voltage Out: voltage at the output (J3 header)
Setting the voltages directly from here is not permitted – You can set them from the
Settings panel parameters.
The "Status" screen contains extended information about the current state of the
OpenUPS like battery voltages, charge/discharge currents, temperature of the PCB,
different states and the output power.
The user also have the possibility to log the current state into a *.csv file. This is
mainly for debug and support purposes.