User manual

MINGDA TECHNOLOGY CO.,LTD
Figure 2.3.2b SD card interface
Enter the SD Card interface, the displayed file is stored on the SD card slice
files (G code), rotating selection, press “OK” to start the machine automatically
prints.
3.3 Temperature Control
Figure 2.3.3a Temperature Control
Figure 2.3.3b Temperature Control Interface
Nozzle: Press selected control adjustment nozzle temperature
Hot bed: Press selected hot bed temperature control and regulation
Preheat ABS: Press the selected, the nozzle temperature and thermal bed
temperature will be set automatically if the material is ABS
Preheat PLA: Press the selected, the nozzle temperature and thermal bed
temperature will be set automatically if the material is PLA
3.4 Motion Control
8