User manual

MINGDA TECHNOLOGY CO.,LTD

Figure 3.2.1a MINGDA software basic interface

Height：The print model slicing height was generated from computer software.

When you need to print the very refined models. Choose the 0.2mm generally.

if you request the high quality of printing. Then you can choose 0.1mm or

0.05mm. the layer height determines the printing quality. If the height is larger.

Then the printing quality is worse. But the advantage is that it can shorten the

time. So the customers need to choose the layer height according to the

models application.

Thickness: Wall thickness; It refers to the outermost thickness of the model

slice section. Generally It’s the multiple of the nozzle diameter.(Our company

3D printer’s nozzle is 0.4. so the customers need to set it into 0.4*n). For

example. If you need the double layer thickness. Please set the 0.4mm nozzle

into 0.8. We recommend to use the 1.2mm wall thickness.

Recycle options：After selected by”√”;it can help to be retracted by the

materials in the extruder; When the 3D printer extruder needs to cross the

blank area.（such as the model appears cavity structure）;The Extrusion

mechanism will retract the extruder materials to a certain length according

to the set，to reduce thee extruder material’s constant flow avoid damaging the

blank structure.。