User's Manual

1. Using included Tag double-sided adhesive, remove one side of the protective film and secure it to the

blank side of the Tag

a. Avoid obscuring Tag QR code

2. Remove the other of side of the protective film and apply securely to the asset

•

Zip Tie

1. Separately, procure zip tie

2. Loop zip tie through keyhole on Asset Tag and connect to the asset

• Activation

1. Pull the battery tab to turn on Tag

2. Using asset tracking software,

a. Scan Tag QR code or manually enter Tag ID

b. enter asset information

c. Confirm successful pairing by pressing SUBMIT

• Button & LED Behavior

LED Blink Rate:

Fast Blink (0.1 seconds each)

Atypical Activity

- - - -

Slow Blink (1.0 seconds each)

Normal Activity

─ ─ ─ ─

LED Actions:

Device Action

LED

Blink Count

Powered Off

N/A

Power On

─ ─ ─ ─

Firmware Update

- - - -

Regulatory Notices

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Operation of this device is restricted to indoor use only.