Asset Tag - User Manual
Description The asset tag is a long life, cost-effective proximity tag with multiple mounting options. The asset tag is intended to be attached an asset by the methods outlined in this user manual. Safety Recommendations Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage. Do not disassemble, dismantle, open, crush puncture, or shred the product. If the product housing/envelope is weakened, cracked, or broken, stop using it immediately.
Back Label The sticker on the back of the device provides the main product information. The TAG ID is necessary to provision the device. This information is encoded in the QR code. Do not remove the label or other proprietary notices or logos affixed to the device. Ne retirez pas l'autocollant ou d'autres mentions de propriété ou logos apposés sur l'appareil.
Features Description Relative humidity environment Less than 95% non-condensing humidity Frequency band 2.4GHz ISM Band Max Output power +4Bm conducted Operating temperature From -30°C to + 60°C noncondensing Storage temperature From 0°C to +35°C noncondensing 1 Mechanical dimensions (in millimeters) 44.5 mm x 29 mm x 7 mm Temperature Measurement Range: -30°C to + 60°C Precision: +/- 1°C Humidity Measurement Accelerometer Absolute accuracy tolerance: +/- 3 %RH over 20..
1. 2. Using included Tag double-sided adhesive, remove one side of the protective film and secure it to the blank side of the Tag a. Avoid obscuring Tag QR code Remove the other of side of the protective film and apply securely to the asset • Zip Tie 1. 2. Separately, procure zip tie Loop zip tie through keyhole on Asset Tag and connect to the asset • Activation 1. 2. Pull the battery tab to turn on Tag Using asset tracking software, a. Scan Tag QR code or manually enter Tag ID b.
Compliance with 47 CFR Part 15 Regulation Class B Devices changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
