User's Manual

Personal Node User Manual
65 / 70
Rev: 1.1
©
c
Minete
01
2
9
workstation or ground. This will discharge any static electricity that may have built up in your
body and on the packaging.
• Always move or transport a sensitive component in an anti-static container.
• Handle components and circuit boards with care. Hold circuit boards and modules by their edges
or mounting brackets. Do not touch components or connectors on the circuit boards.
Section 10 General precautions
• Do not handle or store system boards near strong electrostatic, electromagnetic, magnetic, or
radioactive fields.
10.4 Cold weather operation
Cold weather is defined to be temperatures between 0°C and -40°C.
For installation, maintenance and repairs, it is good practice to consider the following in sub-zero
temperatures:
• Mount all devices in controlled environments (eg workshop).
• Use numerous anchoring points for the cable conduit to minimise both vibration and flexing.
• Do not attach devices or cable conduit to any moving surfaces.
• Limit work to workshops in controlled environments.
• Allow sufficient time for equipment and materials to acclimatise to workshop temperatures
before starting work.
Use frequent cable anchoring in sub-zero temperatures to further reduce flexing.