User's Manual

Personal Node User Manual Section 8 Maintenance activities

55 / 70

Rev: 1.1

Minete

• Planning approval and permit to work documents per operational and HSE.

• All required hardware and cabling is available.

• Positive electrical isolation using site 'lock out tag out' system (eg padlock isolators).

• Appropriate PPE.

Before commencing any electrical work, ensure that:

• You have read and understood the Safety on page ii.

• All electrical work to be done by qualified, authorised and deemed competent persons.

• The work area is clear and free from hazards.

• All relevant onsite permissions and permits to work have been obtained.

• Power is isolated, as per site operational and HSE procedures.

• All safety precautions are in line with Mine Operator policy for working on electrical items.

• All required hardware and cabling is available.

• If operating in sub-zero temperatures, also see Cold weather operation on page 61.