User's Manual

Personal Node User Manual Section 5 Everyday operation
31 / 70
Rev: 1.1
©
c
Minete
01
2
9
Figure 8 Standard belt loop
5.1.2 Detachable swivel belt clip
An optional detachable swivel belt clip can be ordered and consists of two parts; the slot and loop
attaches to the belt or harness and the pin and plate attaches to the Personal Node as shown in
Figure 9 Pin and plate and Figure 10 Slot and belt loop below.
The pin and plate replace the standard belt loop on the Personal Node.
Figure 9 Pin and plate Figure 10 Slot and belt loop
The swivel belt clip permits the Personal Node to swing on the belt and can be removed by rotating
the Personal Node vertically through 180°.
While providing greater flexibility, the wearer needs to be more attentive so that if the
Personal Node is removed temporarily, then he/she does not forget to re-attach it.