User's Manual

Personal Node User Manual Section 1 About this document

4 / 70

Rev: 1.1

Minete

1 ABOUT THIS DOCUMENT

This document is the user manual for the Minetec Personal Node used in deployments of

SafeDetect™ and/or Trax™. Most of the features and functions of the Personal Node relate to the

SafeDetect system. When used with a stand-alone Trax system, the user has no interaction with the

Personal Node other than charging and checking the device. For information on the above systems,

refer to Reference material on page 5. This document is also the user manual for the Minetec

Personal Node Charging Dock.

This document is one of a set of documents outlined in the roadmap diagram below. The Install,

Configure and Maintain stages relate to the solution(s) deployed that use the Personal Node.

All descriptions, screenshots, procedures and conventions in this document are based on an out-of-

the-box installation. Variations in the configuration of the hardware may occur. As such, the narrative

and screenshots shown in this document may not describe exactly the installation at a given site.

1.1 Document revision

Release

Date

Document

Version

Notes

19/02/2019

1.1

Updated for baseline GA1 release, additional instructions for wall mounting

and preventative maintenance.

29/09/2018

1.02

Updated for battery fault LED patterns

1.2 Reference material

The following materials support and supplement the information in this document. Please

use the version supplied by Minetec.