Instruction manual
1
Part B - Instructions for assembling
1. Safety instructions
Caution!
The assembly of the machine is to be done only by a trained mechanician.
All operations connected with the electric installation of this sewing machine are to be done only by an authorized
electromechanician. It is absolutely necessary to get acquainted with the instructions concerning the drive supplied
by the manufacturer thereof.
2. Method of delivering the machine
The content of the delivery is given by the agreement between the supplier and the buyer. There are the following possibilities:
2.1 Complete head with accessories
In this case the delivery contains:
- Complete head.
- Selected spare parts.
- Standard accessories (containing tools see catalogue of spare parts).
- Special accessories (containing some components of the stand - see catalogue of spare parts).
2.2 Stand
The delivery contains components of the stand, but without the stand components contained in the special accessories
delivered with the machine head (see par. 2. 1) and without any electric components.
When not otherwise agreed, the stand will be delivered in disassembled state. When an assembled stand is required, then
special accessories from the head delivery will be used.
Stand complete (ordered number S072 500100 for subclasses -101 and -105) contains following items:
Equipments for stand (it has to be ordered separately):
Presser foot lifting by pedal:
Reverse stitching:
2.3 Motor
The delivery contains the proper motor, switch - circuit breaker, complete cabling (except of the plug) and connecting
material. According to the motor type, it may contain a control panel. When not otherwise agreed, it is delivered in
disassembled state. The machine without thread cutting device is provided with a clutch motor with lever. When positioning
or presser foot lifting or backward stitching with electromagnet are required, the machine without thread cutting device
must be provided with a stop motor.
MG53 000501 Stand frame
MG53 002501 Big pedal
MG53 007511 Set of parts for stand
S615 000316 Stand table top
S522 000450 Small pedal
S980 044982 Presser foot lifting draw bar
S522 000450 Small pedal
S980 060028 Reverse stitching draw bar