Instruction manual

15
Note: 1. For permanent memory storing of changed pa-
rameter, it is necessary to press treadle forwards
down after changing of parameters.
2. Mode of changing parameters is possible only af-
ter finishing of the seam.
Number of stitches in bars:
Number of stitches is stored in parameter’s number.
No. of parameter Value range Description
of parameter of parameters
000(080) 0-254
Number of stitches of
start (fancy) bar forwards
001(081) 0-254
Number of stitches of
start (fancy) bar backwards
002(082) 0-254
Number of stitches of
end (fancy) bar backwards
003(083) 0-254
Number of stitches of
end (fancy) bar forwards
The drive with the panel V 820 enables sewing automatically
up to 40 seams distributed up into eight programmes with the
given stitch numbers and sewing direction (forwards/rear-
wards). For more detailed information see the original driving
instructions.