Full Product Manual

Page 18
I.) Cleaning and/or Replacing the Electrodes
The only part of the MineralPURE Ionizer that will need
maintenance or replacement is the electrodes. They should last
about 1-5 years depending on your pool size, length of swimming
season, water temperature and how well the water was balanced
(ion level, pH, etc.). If the LCD display reads a warning to "Check
Electrodes", it may be time to clean or replace them. To inspect the
electrodes, simply unscrew the electrode chamber with your hands
and visually inspect the electrode bars. A blue greenish coating is
normal, however, if there is a heavy buildup, you may need to
clean the electrode. Using an old toothbrush and lemon juice or a
muriatic acid/water solution, scrub the buildup off the electrode. If
the electrodes are thin and worn out, they will need to be replaced.
Electrode Reordering Information:
Replacement Electrode - Part # CLE-11 - residential copper electrode for the RC-50 Model.
Replacement Electrode - Part # CLE-42 (90/10) - residential copper/silver electrode for the RC-50 Model
Replacement Electrode - Part # CLE-44 (80/20) - residential copper/silver electrode for the RC-50 Model
Ion – Test Kit Replacement
You should replace the reagents at least once a year. You can either replace the entire test kit (exactly as
supplied in the box when you received the MineralPURE unit) or replace the reagents.
 Order # CLA-41 MineralPURE complete test kit
 Order # CLA-42 Replacement reagents "A" and "B"
Contact your dealer or Clearwater Enviro Technologies, Inc.
for more ordering information or visit www.ElectrodeWarehouse.com