Instruction manual

Instruction Manual Page 19
Operating Instructions
Setting Up The Excalibur
“Discriminate” Mode
• Ensure that the battery is fully charged.
• Set the Pin Point / Discriminate Mode switch to “Discriminate”.
• Turn the Excalibur “On” by turning the Threshold control in a clockwise
direction and then continue turning it until the tone becomes “just”
audible.
• Set the desired position of the Disc control.
• Set the Sensitivity control to “Auto” or at the maximum manual setting
without interference.
You are now ready to hunt.
“Pin Point” Mode
• Ensure that the battery is fully charged.
• Set the Pin Point / Discriminate Mode switch to “Pin Point”.
• Turn the Excalibur “On” by turning the Threshold control in a clockwise
direction and then continue turning it until the tone becomes “just”
audible.
• Set the Sensitivity control to “Auto” or at the maximum manual setting
without interference.
You are now ready to hunt.