Datasheet

Precision Pinpointing
Minelab Electronics Pty Ltd
Australia, Asia & Oceania
T:+61882380888
F:+61882380890
E:[e-mail]
Minelab International Ltd
Europe, Middle East & Africa
T:+353(0)214232352
F:+353(0)214232353
E:[e-mail]
Minelab Americas Inc
North, South & Central America
T:+16304018150
TollFree:+18889496522
F:+16304018180
E:[e-mail]
Screwsealed
batterycap
Sensitivity/Modebuttons
Powerbutton
LEDashlight
Probesidedetectionarea
Pinpoint
detectionarea
Speaker
Your local dealer is:
Advantages:
Proportional audio/vibration response
For greater accuracy the PRO-FIND 25 indicates the depth of buried
targets with a proportional vibration and audio response. As the
pinpointer probe gets closer to the target, the intensity of vibration
and audio increases.
Adjustable sensitivity
Narrow down the exact location of targets with the PRO-FIND 25’s
adjustable sensitivity. This can be increased to locate deep targets or
decreased to precisely locate small targets.
Two mode operation
Select from two modes – Audio & Vibrate or Vibrate Only for silent
searching.
Durable water resistant construction
Submersible probe end. The whole pinpointer can be washed under
running water.
Probe side sensitivity
Probe side detection area (360 °) allows targets to easily be located in
the walls of the hole.
Auto power o
To save battery life, the PRO-FIND 25 switches off after eight minutes
of inactivity.
LED ash light
Easily see targets when pinpointing in low light conditions and in
deep holes.
Holster included
Belt mounted holster to comfortably carry pinpointer.
VLF technology
VLF (Very Low Frequency) is a conventional single frequency sine
wave transmission technology. This reliable design has greater noise
immunity to variable ground conditions.
Detector Interference Free technology
The advanced design of the PRO-FIND 25 removes false signals and
noise, commonly associated with other pinpointers. DIF technology
eliminates interference with an operating metal detector, when it is
switched off, by disengaging the coil’s magnetic field.
The PRO-FIND 25 pinpointer allows you to
accurately locate buried targets in holes,
where a metal detector coil doesn’t fit. This
results in smaller holes, less environmental
disruption and faster target recovery time.
LocatingTargets
Length 9.3 in (237 mm)
Diameter 1.6 in (41 mm) base, 0.8 in (20 mm) probe
Weight with Battery 6.82 oz (193.5 g)
Battery 9 volt PP3 (not included)
Battery Life 30 hours nominal (alkaline battery)
Warranty 24 months