User manual

5
Starting E-Trac Xchange
To start the E-Trac Xchange application:
1 Double click the E-Trac Xchange application icon on your
desktop, or open your Start Menu and navigate to: All
Programs – Minelab – E-Trac Xchange
To connect E-Trac to your PC:
1 Insert the USB cable into your E-Trac
2 Insert the other end of the USB cable into your PC
3 Start E-Trac Xchange on your PC
4 Although E-Trac’s transmitter is switched off while
connected to a PC, make sure the coil is not sitting next to
any large metal objects, then turn on your E-Trac
The coil may still pick up noise from the surrounding
environment while connected to your PC. The detector
may treat this as a target detection.
To disconnect E-Trac from your PC
1 Exit E-Trac Xchange via the ‘File’ drop-down menu at the
top of the screen
2 Turn your E-Trac Off
3 Disconnect the USB cable from your PC
4 Disconnect the USB cable from your E-Trac