User manual

25
E-Trac Xchange Backup
Restoring a Backup to E-Trac
If you have previously saved a Backup file of your E-Trac’s
settings you can restore those settings to your E-Trac.
Note: Minelab recommends that you view the settings saved in
your Backup file, using the “Open a Backup file...” feature, before
restoring your E-Trac. This will allow you to check that the Backup
file has the settings you want.
To Restore a Backup to E-Trac:
1 Click on the “Backup” drop-down menu at the top of the
screen.
2 Click on “Restore a Backup to E-Trac...”
3 The Open dialogue will appear allowing you to locate your
saved Backup file on your PC
4 Click “Open”. A warning message will appear asking you to
confirm your Backup restore, click “Yes” to confirm or “No” to
cancel the restore
Once you have restored your Backup file to your E-Trac, all
of your User Modes, Discrimination Patterns and settings will
match those that were saved in the Backup file.
Caution: Restoring a Backup file to your E-Trac will
overwrite all saved User Modes, Discrimination Patterns
and Settings currently stored on your E-Trac with those in
the Backup file.