User manual

23
Uploading Patterns
Xchange allows you to upload your Discrimination Patterns
saved on your PC to your E-Trac. You can upload Disc.
Patterns to your current Smartfind and QuickMask Patterns,
My Patterns and My Mode Patterns.
To Upload Patterns to E-Trac:
1 Ensure you have started E-Trac Xchange
2 Connect your E-Trac to your PC via the USB cable
3 Turn on your E-Trac
4 In Xchange, click on the “Patterns” tab at the top of the
screen
5 In the Patterns screen, click on the “I want to:” drop-down
menu and click on “Upload a pattern to E-Trac”
6 Click the “Open” button
7 The Open dialogue will appear allowing you to locate your
saved Disc. Patterns on your PC; click “Open” once you have
done so
8 Click on the drop-down menu that appears under “2. Select
the slot and press ‘Upload’” and select the slot in your
E-Trac you wish to upload your Disc. Pattern to
9 Click “Upload”
You can view the uploaded Discrimination Patterns in your
E-Trac while it is connected to your PC. By doing this you
can check that the Disc. Pattern has uploaded correctly.
Once E-Trac Xchange has uploaded the Discrimination
Patterns from your PC to your E-Trac you can then use these
Disc. Patterns when you next go detecting with your E-Trac.