Information
Minelab’s most technologically advanced detector
sets a new benchmark for the industry!
E-Trac is Minelab’s most technologically advanced detector, incorporating unique Full Band Spectrum
(FBS) Technology. Its sleek, sturdy design, innovative control panel, intuitive menus, clear LCD, robust
lightweight coil and comprehensive targeting options set E-Trac apart from any other detector available
today.
Minelab has taken a further ground breaking step by incorporating a USB interface, which will allow
you to download and upload E-Trac settings, User Modes and Discrimination Patterns using your own
Personal Computer (PC).
E-Trac will locate valuable metal objects in a variety of mineralised ground conditions such as extremely
salty soils, sea water, wet beach sand and highly magnetic ground conditions. By using the E-Trac you
can become one of the many successful detectorists who combine their passion for the outdoors with
the excitement of discovering valuable coins, relics, gold and jewellery on a regular basis.
E-TRAC Xchange
E-Trac Xchange allows you to download and
upload detector settings and Discrimination
Patterns via USB to your Personal Computer.
This advanced feature is designed to allow you
to quickly configure the E-Trac to particular
detecting environments and preferred targets.
You can always share your experiences and
settings with other detectorists. The installation
CD and Xchange User Guide supplied with your
E-Trac ensure you can get started straight away.
You can build a resource library charting your
success with your E-Trac. Download and store
your valuable Settings and Patterns for your
favourite sites and upload them as required.
There’s no limit to the number you can store
on your PC so make the most of your E-Trac
and never worry about losing your successful
settings again!
QuickMask™
QuickMask™ has two slider
controls to adjust the level
of Ferrous and Conductivity
discrimination.
Pattern
Target information is presented
to you via the Smartfind
™
Discrimination Pattern, Sensitivity
Gauge, FE-CO numbers and
Depth Gauge.
Digital
Large FE and CO numbers
coordinates of the Target Crosshair
are displayed.
Easy to Use Menu
A selection of preset User Modes (Coins, High Trash, Beach,
Relics) and space to save your own personalised User Modes.
The Discrimination Menu to Select, Save, Edit and Combine
Discrimination Patterns.
Auto Sensitivity to show your Sensitivity selection as well as
the ‘suggested’ Sensitivity, as determined by the detector,
relative to ground conditions.
The Audio settings control the types and levels of sounds
emitted by the detector while detecting and when a target
is found.
A specialist Menu of advanced settings and functions such
as Recovery; Trash Density; Ground Setting and Noise Cancel
to maximise performance.
The Preferences Menu to change the appearance of E-Trac’s
Detection Screens.
Menu Features:
LCD Screen
Large LCD with high-resolution greyscale
graphics and backlight for clear viewing in
all light conditions.
USB Port
Connection to Xchange on your Personal
Computer allows you to save your settings
and share with others.
FE-CO Numbers
The Ferrous (Fe) and Conductive (Co)
properties of a detected target are shown,
Fe range from 1–35, Co range from 1–50.
Smartnd™ Window
Two dimensional scale of discrimination on
the same display. SmartFind gives you an
easy recognition of target position.
Navigation Buttons
Used for adjusting settings in Detect
Screens and navigating the Menu.
Menu
Access to User Modes, Discrimination
Patterns and Settings, allowing quick and
simple adjustments.
QuickMask™
Allows you to adjust the Ferrous and
Conductivity rejection levels independently
of the current Discrimination Pattern. This
allows a fast and simple way of editing
Patterns.
Noise Cancel
Minimises interference in the current
environment and can be changed
automatically or manually.
Accept/Reject
Accept or reject any target that you find
and modify the discrimination pattern to
accept or reject all similar targets.
Detect
Use to switch between the Pattern or
Digital Screen.
Pinpoint
Assists you in locating the exact position of
a detected target. There are two different
pinpoint modes; Normal and Sizing.
E-TRAC Technology
E-Trac delivers Full Band Spectrum (FBS) with
Simultaneous Frequencies ranging from 1.5kHz –
100kHz through its powerful microprocessor. The
frequency range means that the signal received
from the detector coil is analysed from a wide
range of responses. This allows E-Trac’s advanced
signal processing to rate detected objects
according to their ferrous and conductivity
(FE-CO) characteristics and analyse more target
information so that the target identification (ID) is
more accurate.
Minelab’s Smartfind™ is a unique two-dimensional
scale of discrimination. Smartfind™ graphically
represents both the ferrous and conductivity
properties on the same display. This, combined
with E-Trac’s target Discrimination ability
eliminates signals from undesired targets and
accept signals from desired targets. E-Trac’s
technology means:
• Greaterdetectingdepth
• Highsensitivityoverawiderangeoftargets
• Lessinterferencefromelectromagneticsources
• Moreaccurateidenticationoftarget
characteristics
Discrimination
User Modes
Preferences
Expert
Audio
Sensitivity
Depth Gauge
Represents the approximate depth of a
target. The range, from top to bottom, is
0 to greater than 12” (0–30cm plus).
Mode Information Icons
Indicate the Mode you have selected.
Sensitivity Gauge
The left hand bar shows either Auto or
Manual level with the numeric Sensitivity
value above the gauge. The right bar is the
‘suggested’ Sensitivity.
Detection Screens
“E-Tracisdeadon!Theiconconnectsinthecentrewhenthecentre
ofthecoilisoverthetargetanditmakesitveryeasyandaccurateto
pinpointtargetsevenwithtrashnearby.….getsanA+forsure.“
Minelab Field Tester