User's Manual

9
CONTENTS
Beep!
Beep!
Pinpoint
LOCATE A TARGET MANUALLY
It is possible to locate a target successfully without using
Pinpoint, however this requires practice� This method may be
required when a desirable target is surrounded by trash�
1� Sweep the coil slowly across the target location keeping
the coil parallel to the ground�
2� Locate the centre of the target by listening for the loudest
target signal response�
3� Make a mental note of the position, or mark a line on the
soil with your shoe or a digging tool�
4� Move to one side so that you can pass the coil over the
target at right angles to your initial direction�
5� Repeat steps 1 and 3 from your new position� The target is
located where the two imaginary lines cross�
Beep!
Beep!
Make a line where the
strongest signal is heard�
Stand at right‑angles to
your initial position and
repeat�
The intersection of the
two lines marks the exact
location of the target�
1‑3
4‑5