User's Manual

7
CONTENTS
Bluetooth® Headphones
Bluetooth® headphones with aptX Low Latency™ compatibility such as the Minelab
ML 100 wireless headphones are best used with GPX 6000™ for best performance.
Standard Bluetooth® headphones are also compatible.
Minelab ML 100 headphones use aptX™ Low Latency technology, which delivers faster, higher quality audio than standard
Bluetooth®, so it will give more precise and faster detection responses.
Optional Wired Operation
The ML 100 headphones are supplied with a
detachable auxiliary cable for wired operation.
To use the cable, plug the connector into the
headphone jack and turn 90° anti-clockwise to lock
the connector. This prevents the connector from
being accidentally disconnected.
1. Volume Plus button (+)
2. Multi-function button
3. Volume Minus button (−)
4. Status LED
Pairing mode (alternating blue and red)
Connected (flash every 3 sec)
On, not connected (flash every 2 sec)
Charging
Charging complete
5. USB Micro-B charging socket
Connect the USB charging cable to charging USB socket
of the headphones. The Status LED will remain solid
red during charging. When charging is complete, the
Status LED will turn solid blue. NOTE: USB Charger is
not supplied. Any generic high quality USB charger can
be used.
6. Headphone socket 3.5 mm (⁄ inch)
1
2
3
4
5
6