User's Manual

Monitoring ECG Changing the ECG Settings
TM80/TM70 Telemetry Monitor Operator’s Manual 7 - 15
7.4.4 Configuring the Pacer
1. In the [Pacer] section of the [ECG] menu, tap the options described in the follow-
ing table.
2. Tap to exit the [ECG] menu.
7.4.5 Configuring the ECG Waveform Size
The [Waveform Size] section of the [ECG] menu lists all available leads. You can select
the desired ECG lead to set the waveform size. For details about the waveform size set-
ting, refer to "Configuring the Pacer" on page 7 - 15.
Options Description Settings*
Paced Selects the paced status. Unspecified, No, Yes
[Unspecified] is only available for
the first time you set the paced sta-
tus.
Refer to "Checking the Paced Sta-
tus" on page 7 - 11 for details.
Markers Selects the pacer indicator.
Line
A 1 cm line shows above each ECG wave-
form each time the pace pulse is detected.
Dot
A 2 mm dot shows above each ECG wave-
form each time the pace pulse is detected.
Line, Dot, Off
* The factory default settings are in bold.
NOTE
• When [Paced] is set to [Yes], the [Makers] option can be available.