User's Manual

Monitoring ECG Changing the ECG Settings
TM80/TM70 Telemetry Monitor Operator’s Manual 7 - 13
7.4.1 Configuring the ECG Setup
Enter the ECG menu in either of the following ways:
■ On the main screen, tap the HR digital area or ECG waveform area to enter the
[ECG] menu.
■ In the main menu, tap [Parameter Setup] → [ECG] to enter the [ECG] menu.
1. In the [Setup] section of the [ECG] menu, select the options described in the fol-
lowing table.
2. Tap to exit the [ECG] menu.
Options Description Settings*
Lead Placement Enters the [Lead Placement] window. Refer to "Checking the Lead
Placement" on page 7 - 10 for
details.
Cable Type Selects the current ECG leadwire type. Auto, 3 Lead, 5 Lead, 6 Lead
Refer to "Configuring the Pacer"
on page 7 - 15 for details.
Smart Lead (Monitored
Lead)
When [Cable Type] is set to [Auto], the option displays [Smart Lead].
Drag the switch to right or left to enable or disable the Smart Lead function.
When [Cable Type] is set to [3 Lead], the option displays [Monitored Lead].
Refer to "Configuring the Pacer" on page 7 - 15 for details.
Filter Selects the ECG filter.
Monitor
Use under normal measurement
conditions.
ST
Use when ST monitoring is applied.
Monitor, ST
Color Selects the ECG waveform color. 16 colors
The default color is green.
* The factory default settings are in bold.