Operator's Manual

Configuring the TM80/TM70 Maintenance Menu
TM80/TM70 Telemetry Monitor Operator’s Manual 13 - 7
3. Tap the desired option from the list of options to configure the selected quick key.
4. Repeat steps 2 to 3 to configure other quick keys, if needed.
5. Tap to exit the [Quick Keys] menu.
13.2.4.2 Deleting a Quick Key
1. From the quick keys area at the bottom of the [Quick Keys] menu, press and hold
the desired quick key for two seconds, and then release it.
The quick key background turns to red and displays [Delete].
2. Tap [Delete].
The quick key is removed from the quick keys area, and the area displays [Not
Used].
3. Tap to exit the [Quick Keys] menu.
13.2.5 Configuring the Network Menu
In the [Network] menu, you can configure network settings and connect the TM80/
TM70 to the BeneVision Central Monitoring System via the wireless network.
1. In the [Maintenance] menu, tap [Network].
2. Select the options described in the following table.
A list of options