Operator's Manual

Monitoring with the TM80/TM70 at the CMS ST Monitoring
TM80/TM70 Telemetry Monitor Operator’s Manual 12 - 19
The height of grey bar indicates the baseline ST value and the green bar (cyan, yellow or
red if an alarm occurs) indicates ΔST.
12.9.7 Entering the ST View
The ST View shows a complete QRS segment for each ST lead. The color of current ST
segments and ST values is consistent with the color of ECG waveforms, normally green.
The color of baseline ST segments and ST values is white.
To enter the ST View, follow this procedure:
1. Select the ECG digital area or waveform area to enter the [ECG] menu on the
ViewBed screen of the CMS.
2. Select the [ST] tab to enter the [ST] menu.
3. From the bottom of the menu, select [ST View].