Operator's Manual

Monitoring NIBP (Optional) Unpairing the TM80/TM70 with the BP10
TM80/TM70 Telemetry Monitor Operator’s Manual 10 - 5
10.3.2 Unpairing via BP10
1. Press the MPAN key on the BP10.
2. Select [Ye s ] when the prompt message “Are you sure you want to close MPAN and
unpair BP10?” appears.
10.3.3 System Responses after Successful Unpairing
When the TM80/TM70 is unpaired with the BP10 successfully:
■ The status of the BP10 connected previously will be changed to [Disconnect]
under [Devices] on the TM80/TM70.
■ The icon will be changed to in the top-right corner of the TM80/TM70’s
screen and of the BP10.
■ Measured NIBP values on the main screen of the TM80/TM70 is displayed as “---”
indicating invalid values.
CAUTION
• Before moving a TM80/TM70 or BP10 to another area, unpair them first.
• Before admitting a new patient at a BP10, you need to unpair it with a
TM80/TM70 first.