Operator's Manual

Wireless Specification Product Specifications
A - 8 TM80/TM70 Telemetry Monitor Operator’s Manual
A.6.1.2 Implemented Functions
The TM80 transmits waveforms, parameters, status and alarms of ECG, SpO
2
, RESP; and
parameters, status and alarms of NIBP to the central monitoring system. The waveforms,
parameters, status and alarms displayed on the central monitoring system are consistent
with that of the TM80.
The TM80 can work well with APs which support POE (e.g. AIR-CAP2802I-C-K9, working
with AC: AIR-CT2504-15-K9), if the RSSI from APs is higher than -65 dbm.
A.6.1.3 Function Specifications
Wireless baud rate
IEEE 802.11b: 1~11M Mbps
IEEE 802.11a/g: 6~54M Mbps
IEEE 802.11n: MCS0~7
IEEE 802.11ac: MCS0~8
Output power
< 20 dBm (CE requirement: detection mode – RMS);
< 30 dBm (FCC requirement: detection mode – peak power)
Operating mode
Infrastructure
Data security
Standard:
WPA/ WPA2 PSK, WPA/WPA2 EAP, WPA/WPA2 CCKM
EAP method:LEAP,TTLS,TLS,FAST,PEAP-MsChapV2,PEAP-GTC,
PEAP-TLS;
Encryption : TKIP and AES
QoS
QoS setting supported
WARNING
• Do perform all network functions of data communication within an
enclosed network.
Data integrity
The probability for loss of application data within wireless net-
work should be less than 1000ppm(0.1%).
Data latency
Total delay of data transmission from the TM80 Telemetry Moni-
tor to the Central Station: ≤ 3 seconds.