Operator's Manual

Configuring the TM80/TM70 Maintenance Menu
TM80/TM70 Telemetry Monitor Operator’s Manual 13 - 15
13.2.8.2 Setting the Screen Lock
The initial enabling of screen lock mode requires a passcode to be entered immediately
as follows:
1. In the [Maintenance] menu, tap [Screen Lock] to select a screen lock mode.
2. Enter a new passcode for the screen lock.
After the passcode is entered, the screen exits the passcode setup menu. The
selected lock mode displays to the right of [Screen Lock].
13.2.8.3 Changing the Current Screen Lock Passcode
1. In the [Maintenance] menu, tap [Screen Lock].
2. Tap [Screen Lock Passcode].
3. Input the current password.
4. Input and verify the new password
13.2.9 Changing the Passwords
1. In the [Maintenance] menu, tap [Edit Passwords].
◆ Tap [Maintenance Password] and follow the on-screen instructions to
change the maintenance password.
◆ Tap [Service Password] and follow the on-screen instructions to change the
service password.
2. Tap the icon to exit the [Edit Password] menu.
13.2.10 Changing the Device Name
1. In the [Maintenance] menu, tap [Device Name].
2. Use the on-screen keyboard to input the device name.
3. Tap [Accept] to save the setting and exit the [Device Name] menu.
NOTE
• Do not set the same device name for the TM80s.